Electronics & 3D Printers
Original version size:38.8mm*15.8mmOriginal version weight: 3gCompatible version size:38.8mm*15.8mmCompatible version weight: 3g1. Module: HC-05.2. Use the main bluetooth CSR chip, bluetooth v2.0 protocol standards.3. Module operating voltage 3.3 V.4. Potter default rate of 9600, the user can be set..
QAR 0.00
1. The core module uses hc-06 slave module to lead out interfaces, including VCC, GND, TXD, RXD, and reserved LED status output pin. The single chip microcomputer can judge whether Bluetooth has been connected through the pin status, and the key pin is invalid for the slave2. The LED indicates the B..
QAR 0.00
Operating voltage range:DC voltage 4.5-20VQuiescent current:<50uALevel output:High 3.3 V / low 0VTrigger mode:L can not be repeated to trigger /H repeatDelay time:5-200S (adjustable) can be produced in a few seconds - - - for a few secondsBlocking time:2.5S (default) can be produced in a few seco..
QAR 0.00
Elecrow USB-HD Connector for 5 inch Raspberry Pi Screen Display DIY HDMI-Compatible Adaptor- Raspberry Pi 2B/3B/3B+/4B..
QAR 0.00
Size: 25x35cm, S-140 with magneticColor: BlueFeatures: High temperature resistance,soft texture and high stabilityMaterial: SiliconeSeveral hole locations to set screws, IC chips and small parts...
QAR 0.00
HY510 thermal grease is used to fill the gap between the ASIC chip and the heat sink. This material is also called thermal interface material. Its function is to conduct the heat emitted by the ASIC chip to the heat sink, to keep the ASIC chip’s temperature at a level that can work stably, prevent t..
QAR 0.00
Withstand voltage: 1000VCurrent: 30AWeight: 8gSheath material: PVC insulationCrocodile clip material: pure copper nickel platedSpring material: steel wireProduct FeaturesThe fish clip has an opening of 10MM and can be energized with a current of 30A, with a withstand voltage of 1000VAll copper mater..
QAR 0.00
Without dupontt case Optical Sensor Technology: infraredLens: Wide Angle, FixedReal Angle of View: 15 DegreesConnector Type:DC power connectorOptical Sensor Size: 1/4 inch..
QAR 0.00
similar to the ‘analog’ joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers - one for each axis. Pots are ~10k each. This joystick also has a select button that is actuated when the joystick is pressed down. This module uses a 5V supply. The original sta..
QAR 0.00
The Creality K1 Max is a high-speed FDM 3D printer designed for serious productivity. With lightning-fast acceleration of 20,000 mm/s², it reaches up to 600 mm/s in just 0.03 seconds, making it as efficient as multiple regular 3D printers combined. K1 Max features a 300x300x300 mm build volume, idea..
QAR 0.00
yellow Frame ordinary(4P Jack)Rated Current: AC 3-16ARated Voltage: 250VProtection Class: IP55Ambient Temperature: T85/55Number of Cycles: 100,000..
QAR 0.00
Model: KN3-3,KN3-203Mounting Hole: 12mmTap Position: ON-OFF-ON, ON-OFF..
QAR 0.00